Idiomas disponibles
Idiomas disponibles
FUNCTIONAL DESCRIPTION
2
1
11
12
13
14
1. Backpack
2. Backpack latch
3. Carry handle
4. Coupler locking
handle
5. Flex shaft coupler
6. Remote storage
7. Transmit LED
8. Pairing button
9. Remote on/off switch
3
4
7
5
6
17
16
15
10. Start/Stop button
11. Remote mode
position
12. OFF position
13. ON position
14. ONE-KEY
indicator
TM
15. Cold Start LED
16. Arm button
17. Pairing button
WARNING
cific charging instructions, read the operator's
manual supplied with your charger and battery.
Removing/Inserting the Battery
To remove the battery, push the battery latch lock
to the side and squeeze the battery latch lever. Pull
the battery pack away from the machine.
WARNING
8
To insert the battery, slide the pack into the body of
the machine. Make sure it latches securely into place.
9
WARNING
10
Others may be hazardous.
Attaching the Flex Shaft
Flex shafts are normally lubricated from the manu-
facturer from one end. Attach the greased end to
the machine. Use a flex shaft with a length suitable
for the job.
1. Remove the battery pack. WARNING! Always
remove battery pack before changing or removing
accessories.
2. Open coupler locking handle.
3. Place the flex shaft into the coupler.
4. Pull the flex shaft until the coupler locking handle
engages. (Handle will automatically fall into place
with an audible click).
Attaching Head to Flex Shaft
1. Remove the battery pack. WARNING! Always
remove battery pack before changing or removing
accessories.
2. Coat flex shaft threads with sealant to prevent
water from entering head
3. Thread head onto flex shaft.
4. Tighten by gripping metal portion of the flex shaft
and flats of the head.
Putting on the Backpack
1. Ensure backpack is securely latched to base.
2. Pick up the backpack by one of the shoulder
straps, slide your arms through each shoulder
strap.
3. With the machine on your back, tighten the
shoulder and waist straps until they fit snugly and
securely. Connect chest strap.
4. Be sure the shoulder, chest, and waist straps are
tight but comfortable; if they are too loose, the
machine may slide around on your back, making
it uncomfortable to wear.
5. Be aware machine forces may shift during use and
movement, such as twisting or bending over.
4
ASSEMBLY
Recharge only with the charger
specified for the battery. For spe-
Always remove battery pack before
changing or removing accessories.
Only use accessories specifically
recommended for this machine.
