Idiomas disponibles
Idiomas disponibles
10.1
Cleaning and maintenance at a glance
Before each use
What?
Check the power cable and plug for
damage.
Check and, if necessary tighten, all screw
connections.
After each use
What?
Clean grass and moss from the product
and the motor's ventilation slots.
10.2
Cleaning the product
Clean the product immediately after each use. Dried-on grass is extremely hard and difficult to
remove.
▪
Empty the grass collector.
▪
Remove residual grass using a brush or plastic scraper (do not use any sharp
implements).
▪
Remove deposits from the wheels.
▪
Wipe down the product with a slightly damp cloth.
▪
Never clean the product with water or high-pressure jet.
MAINTENANCE: The machine should be cleaned at least twice a year by
removing the motor cover in order to be able to remove dried grass.
11
TROUBLESHOOTING
If something isn't working...
Warning! Risk of injury! Improper repairs can result in the product
functioning unsafely. This endangers yourself and your environment.
Malfunctions are often caused by minor faults. You can easily remedy most of these yourself.
Please consult the following table before contracting the store. You will save yourself a lot of
trouble and possibly money too.
Fault/ malfunction
Machine doesn't start.
Copyright © 2024 VARO
POWXG75160
How?
Visual inspection, if necessary, have any
damaged parts replaced by an electrician.
Tighten using a suitable tool.
How?
Remove using a vacuum cleaner or brush.
Cause
Machine is unplugged.
Power cord or plug is
defective.
Other electrical defect.
Improper startup
sequence is performed.
Product is overheated.
Unsuitable extension cord.
P a g e
Remedy
Verify that the product is
plugged into an electric outlet.
Contact your local store.
Contact your local store.
Press the Safety lock
(2) first and then pull the
Start/Stop lever (1).
Remove grass that
accumulated around the
scarifying and aerating device
(15). Allow the product to cool
down before starting it again.
Use a suitable extension cord.
| 11
EN
www.varo.com
