Idiomas disponibles
Idiomas disponibles
▪
Position the product on a flat grass surface.
▪
Keep the operating safety lock (2) pressed.
▪
Pull and keep hold of the operating lever (1); release the operating safety lock (2).
▪
Wait until the motor has reached the maximum idle speed.
▪
Steer the product at an even, slow speed (walking pace) in the straightest lines possible.
▪
Work in slight overlapping rows. The most effective pattern for scarifying/raking lawns is
straight lines along one of the sides. This will keep the rows even and ensures that all the
lawn is scarified/raked without missing any spots (see Fig. 7).
▪
Circle around flower beds. When reaching a flower bed in the middle of the lawn, make a
row or two around the circumference of the bed.
▪
Pay special attention when changing direction.
9.1
Important notes
WARNING Risk of injury:
▪
Always keep the extension cable away from the product.
▪
Always work across slopes where possible.
▪
Never start the product on a consolidated surface.
▪
Release the operating lever (1) immediately if the scarifier roll (working roll) becomes
blocked by a foreign body.
▪
If a foreign body gets trapped, check the product and have it repaired if necessary.
▪
To improve results and maximise the service life of the product, the grass should be cut as
short as possible.
▪
Staying too long in one position can damage the grass swards.
10
CLEANING AND MAINTENANCE
WARNING! Risk of injury! Before any maintenance and/or cleaning work:
▪
Switch off the product.
▪
Pull out the mains plug.
WARNING! Risk of injury! Scarifier roll (working roll) runs on!
▪
Never tilt, lift or carry the product while the motor is running.
▪
Wait until the product has come to a standstill before commencing any maintenance
and/or cleaning work.
WARNING! Risk of injury! Perform only the maintenance work described here
yourself.
Any other work, especially motor maintenance and repairs must be performed by a trained
professional. Improper work can cause product damage and hence physical injury.
Copyright © 2024 VARO
POWXG75160
P a g e
| 10
EN
www.varo.com
