Before Cutting - AGP R16 Instrucciones De Seguridad

SET UP
• Connect the water supply from the converter to the motor using the water coupling hose
• Connect the converter to the water supply
• Check for water leaks
• Connect the motor coupling cable to the converter
• Connect the converter to the power supply
OPERATION
• When the power converter power supply cable is plugged in, the
supplied voltage will be displayed on the LCD screen
Press the POWER button on the power converter to energize the
•
motor. "ON" will be displayed on the LCD screen and the Load
Warning Lamp on the motor will be lit green. This indicates that the
motor is now live and may be operated by its trigger switch.
The Switch:
To start the machine, first press the Release Button, then press the Trigger
Switch.
To stop the machine, release the Trigger Switch, then press the Power
Button on the power converter to de-energize the machine.
How to hold the machine
• Always hold the machine with both hands, with the right hand on the main handle and with the left
hand on the side handle. (This applies even if the
operator is left-handed)
• Do not stand directly in line with the blade.
Rather, stand in such a way that, if it kicks back,
you will not be in the path of the blade.
• Never lean over the blade path. That would put
your body in line with the blade if it kicks back.
• Do not cut above shoulder height.
• Never cut while standing on a ladder or other
unstable platform.

Before cutting

• Check the area where the cut is to be made to ensure that it is clear of objects which could cause the
operator to stumble.
• Before cutting, it is sometimes useful to mark the line of cut with chalk or the like. For straight cutting, a
wood plank is also useful in guiding the machine to make a straight cut.
GB
13
LCD screen
Power Button
Trigger Switch
Release Button