Battery And Charger; Technology; Energy Saving Modes - BH Emotion EVO Manual Usuario

E L Ú T I L I S A T E U R
ATOM

BATTERY AND CHARGER

essaire d'atteindre la décharge complète de la
as non plus nécessaire d'effectuer une charge à

Technology

re en compte qu'afin d'obtenir un rayon d'action
The battery that your BH bike is equipped with contains lithium-ion cells and is the most advanced technology
available in terms of energy density (energy stored per kilogram of weight and per cm
ent de suivre les indications suivantes:
The current range of BH EMOTION batteries has different capacities, depending on the version purchased.
Lithium-ion batteries have the following characteristics:
1º
Their performance decreases in extremely hot or cold environments.
• One additional characteristic of BH EMOTION lithium-ion batteries is that they have no "memory effect",
External port
and are not affected by incomplete discharging.
Charger
• They lose their charges naturally and gradually with use. The battery can be fully discharged (100%)
attery port
approximately 500 times, with maximum battery deterioration of 20%. In the case of partial discharges,
only the discharged part is counted. For example, if we charge the battery every time its charge level falls
by 25%, we will be able to charge it to 100% of its initial capacity 2,000 times. In short, the guaranteed
1º
durability of the battery with maximum degradation of 20% is at least 20,000 km.
Charger

Energy Saving Modes

The battery has been designed to ensure a long service life. This is possible thanks to the energy saving modes
that prevent inefficient battery consumption:
• Transport Mode (only during the first use)
In order to minimise internal consumption while transporting the bicycle from the factory to the store,
the battery is in Transport mode.
suivre les indications suivantes:
The user can finally exit this Transport mode by charging the battery to 100% before its first use.
ATTENTION
• Stand By Mode
1º
In order to minimise internal consumption, the battery automatically switches to Stand By mode.
This happens automatically when the system detects no charging, no discharging and no communication
External port
with the battery for a period of 10 minutes. So, for example, this mode will automatically turn off the display
Charger
panel after 10 minutes without use, if the user has left it on after parking.
attery port
The user can exit this Stand By mode by simply turning on the display panel of the bicycle.
1º
Charger
FR
2º
2º
External port
Battery port
If the battery does not charge fully, the Transport mode will not deactivate,
repeatedly entering this mode quickly for its protection. Remember to fully
charge the battery to deactivate the Transport mode definitively.
2º
2º
External port
Battery port
USER MANUAL
of volume).
3
EN
43