Parkside PDEME 130 A1 Instrucciones De Utilización Y De Seguridad página 56

Press Max/Min
[ 5 ]
Shown in the display
MIN
and
– [ 12 ]
the lowest detected decibel reading
–
The decibel reading is updated in the display when an
even lower decibel reading is detected .
Press Max/Min
[ 5 ]
level measurement mode . MAX/MIN
from the display .
3 ] [
again .
(fig . E):
3 ] [
again to toggle to the decibel
disappears
12 ] [
Holding (freezing) a measured value
While taking a measurement in an area in which you
cannot read the display
the measured value in the display .
shown in the display .
Press Hold again to take another measurement .
6 ] [
, press Hold
to hold
3 ] [ 6 ] [
HOLD
is
9 ] [
GB/IE 55