Idiomas disponibles
Idiomas disponibles
MODEL: PMPN
whether it contains fasteners or not.
0 Wash hands after handling. This product or its
power cord may contain chemicals known to the
State of California to cause cancer and birth
defects or other reproductive harm.
TOOL USE AND CARE
O
Know this tool. Read manual carefully, learn its
applications and limitations, as well as the specific
potential hazards related to this tool.
O
Use only fasteners that are recommended for
your models. Do not use the wrong fasteners or
load the fasteners incorrecily.
O Check for misalignment or binding of moving
parts,
breakage
of parts,
and
any
other
condition that may affect the tool's operation.
If damaged, have the tool serviced before using.
Many accidents are caused by poorly maintained
tools.
© Maintain tools with care. Keep tool clean. A
properly
maintained
tool, reduces
the
risk of
binding and is easier to control.
@ Store tools out of the reach of children and
other untrained people. Tools are dangerous in
the hands of untrained users.
O Check operation of the tool before use. Do not
use the tool if the workpiece contact mechanism
is not working correctly as accidental driving of a
REEMAN
fastener may occur.
@ Do not force tool. Use the correct tool for your
application. The correct tool will do the job better and
safer at the rate for which it is designed.
@ Use clamps or another practical way to secure
and support the workpiece to a stable platform.
Holding a tool by hand or against the body is unstable
and may lead to loss of control.
@ Keep the tool and its handle dry, clean and free
from oil and grease. Always use a clean cloth when
cleaning.
Never
use
brake
fluids,
gasoline,
petroleum-based products, or any strong solvents to
clean your tool.
@ Do not use the tool as a hammer.
@ Never use this tool in a manner that could cause
a fastener to be directed toward anything other
than the workpiece.
@ Never use gasoline or other flammable liquids to
clean the tool. Never use the tool in the presence of
flammable liquids or gases. Vapors could ignite by a
spark and cause an explosion which will result in
death or serious personal injury.
@ Always fit tool with a fitting or hose coupling on
or
near
the tool
in such
a manner
that
all
compressed air in the tool is discharged at the
time the fitting or hose coupling is disconnected.
Do not use a check valve or any other fitting which
allows air to remain in the tool. Death or serious
06
HTTP:/WWW.
FREEMANTOOLS.
COM
1-888-669-5672
MODEL: PMPN
personal injury could occur.
O Never place hands or any other body parts in
the fastener discharge area of the tool. The tool
might eject a fastener and could result in death or
serious personal injury.
@ Never carry the tool by the air hose or pull the
hose to move the tool or a compressor. Keep
hoses
away
from
heat, oil and
sharp
edges.
Replace any hose that is damaged, weak or worn.
Personal injury or tool damage could occur.
@ Always assume
the tool contains fasteners.
Respect
the tool as a working
implement;
no
horseplay.
O Always keep others at a safe distance from the
work area in case of accidental discharge of
fasteners. Do not point the tool toward yourself or
anyone
whether
it contains
fasteners
or not.
Accidental
triggering of the tool could
result in
death or serious personal injury.
O Do not drop or throw the tool. Dropping or
throwing the tool can result in damage that will
make the tool unusable or unsafe. If the tool has
been dropped or thrown, examine the tool closely
for bent, cracked or broken parts and air leaks.
STOP
and repair before using, or serious injury
could occur.
O Clean
and
check
all air supply
hoses
and
fittings before connecting the tool to an air
REEMAN
supply.
Replace any damaged
or worn
hoses or
fittings. Tool
performance
or durability may
be
reduced.
@ Do not use the tool if it leaks air or does not
function properly.
@ Do not operate the tool if it does not contain a
legible warning label.
@ Always carry the tool by the handle. Never carry
the tool by the air hose.
TOOL SERVICE
@ Use only accessories that are identified by the
manufacturer for the specific tool model.
O Use of unauthorized
parts or failure to follow
maintenance instructions may create a risk of
injury.
O Use only the lubricants supplied with the tool or
specified by the manufacturer.
@ Tool service must be performed only by qualified
repair personnel.
OPERATION
@ Do not drive fasteners near edge of material. The
workpiece may split causing the fastener or ricochet,
injuring you or people around.
HTTP://WWW.
FREEMANTOOLS.
COM
1-888-669-5672
0
