Idiomas disponibles
Idiomas disponibles
valve extension (5).
Now connect the inflator (7) to the tire inflator (9).
Using a set of attachments
The extension kit allows you to use the tire inflator in
the following additional ways:
a) Inflating balls using a ball needle (10).
b) The valve attachment (11) enables the inflation of
bicycle tires.
c) Inflating pools, air mattresses or boats using the
additional attachment (15).
d) inflating things using a screw valve (e.g. boats)
using a screw valve attachment (13).
e) Discharge of large volumes. Use the valve drain
extension (12) for this purpose.
f) Two beveled universal attachments (8/16) can be
used to inflate air mattresses.
Cleaning/Care
Note: We recommend cleaning the device immedia-
tely after each use.¬ Disconnect it from the mains
before cleaning.
To avoid burns, first make sure the device is comple-
tely cooled down.
Do not use detergents or solvents for cleaning.
Prevent water from entering the device.
Relieve pressure from the device before cleaning.
You do this with a tire inflation device that you use as
a blow gun and activate the trigger until no more air
leaks out.
Note: Store the compressor in a dry and safe place.
Vent the device and any attached air tools before
storing.
This device is maintenance free.
Note: Never open the device. Any repairs must be
carried out by an authorized service branch or custo-
mer service.
If any of the errors below occur, please do the fo-
llowing:
Disconnect the device from any power supply.
Let the device cool down and wait a while for the
residual energy to neutralize.
Always check that the equipment is in safe operating
condition.
SPECIFICATIONS
Nominal voltage: 230 V approx. 50 Hz
Nominal power: 1.1 kW
Type of operation: S3 15% 10 min.
Compressor speed: 3550 rpm.
Operating pressure: max. 8 bar
Theor. suction capacity: 180 l/min.
Noise level Lpa: 75.2 dB (A)
Uncertainty Kpa: 3 dB (A)
Sound power level Lwa: 95.2 dB (A)
Uncertainty Kwa: 3 dB (A)
Guaranteed
sound power level: 97 dB (A)
Protection type: IP20
Device weight: approx. 5.8 kg
Measured value
corresponds to: ISO 2151
Noise emissions measured according to the ISO 2151
standard
Operation type S 3-15% - 10 min.: S3 = Intermittent
43
