Warning; Precautions Before Use - VISIOMED bewell connect MyOxy Manual De Usuario

Dear Customer,
You have just purchased MyOxy, the digital pulse oximeter from BewellConnect® . In order
to use it optimally and efficiently, we recommend that you read these operating instructions
carefully.

1. WARNING

- Only use this device for the purpose for which it was designed as outlined in this guide.
- This device is adapted for spot-checking in hospitals and hospitals facilities.
- Use this device in a temperature range between 41°F and 104°F / 5°C and 40°C.
- Do not expose this device to extreme temperature conditions (> 158°F / 70°C or < -13°F /
-25°C).
- Do not use this device in over 93% of relative humidity.
- This device must always be kept in a clean and dry place.
- Do not expose the device to sunlight or water.
- Do not expose the device to electric shocks.
- Do not drop the device.
- Follow the maintenance instructions given in this guide.
- Do not try to open the device. In the event of malfunctions, contact your customer service.
- Keep out of reach of children.
- The measurement results are given as a guide. If you have any doubts about your results,
please contact your doctor.
- Stop using the device in the event of an anomaly or malfunction.
- This device is not designed for use by people (including children) with reduced physical,
sensory or mental capacities, or by people lacking experience or knowledge, unless they are
assisted by a person who is responsible for their safety and supervision or who has been given
instructions about using this device.

2. PRECAUTIONS BEFORE USE

- Do not use this device near an Electrosurgical Unit (ESU), since it may function incorrectly as
a result.
- The pulse oximeter must be placed so that the pulse can be recorded correctly and the main
objective is to evaluate the oxygen saturation (SpO
with the readings.
- Do not use the device in an MRI (Magnetic Resonance Imaging) or CT (Computed Tomography)
environment.
BewellConnect - BW-OX1 - User Manual - 072017v2
) level. Check that nothing is interfering
2
7