Recommendations Before Taking Measurements; Downloading The Application; How To Take Measurements; Cleaning And Maintenance - VISIOMED bewell connect MyOxy Manual De Usuario

The battery indicator flashes when the battery is low. The device must be recharged using the
USB cable
s

5.2. RECOMMENDATIONS BEFORE TAKING MEASUREMENTS

- When using the device for the first time, charge the battery via the USB port. Connect the USB
cable of the device to a computer to charge it. Once the device has been charged, you can
disconnect the USB cable.
- Avoid eating, smoking or exercising for 30 minutes before measuring your oxygen saturation.
- Remain calm for 15 minutes before the measurement.
- Keep still and do not speak during the measurement.

5.3. DOWNLOADING THE APPLICATION

The following information may be updated.
Download the BewellConnect® application to your smartphone or tablet :
- via the App Store or Google Play
Then click on the MyOxy icon to activate the sub-application.
The results are immediately transferred by the application via Bluetooth Low Energy.

5.4. HOW TO TAKE MEASUREMENTS

See figure C page 2
Insert your finger (generally the index finger) into the device. The fingernail must be facing
upwards. The device turns itself on automatically when a finger is inserted. The readings appear
on the device screen. Wait until the value stabilizes. When the result flashes, the data has been
transferred to the application.
Important : the data will only be transferred to the application if the application is open while
l
the device is being used and Bluetooth Low Energy is activated.
The device switches off automatically after eight seconds.
s
If it is difficult to obtain a reading, try with the other hand or with another finger on the same hand.

6. CLEANING AND MAINTENANCE

- To clean the silicone inside the oximeter that comes into contact with the finger, use 70°
rubbing alcohol. Apply the alcohol using a soft clean cloth. Also use the rubbing alcohol to
clean the finger being measured, before and after use.
- Do not pour or spray liquid on to the surface of the oximeter. Make sure that liquid does not
come into contact with the device openings. Leave the oximeter to dry before using again.
BewellConnect - BW-OX1 - User Manual - 072017v2 11