Idiomas disponibles
Idiomas disponibles
Recording Operation
This machine can record the music & sound while playing a CD or CD+G disc or Bluetooth
when connected or an Aux Input. The recording will be an MP3 file.
1. Switch on Power (follow SETUP POWER page)
2. Insert an USB flash into the USB slot at the front panel
3. Plug in a Microphone(s) to any Microphone jacks (Mic 1 & Mic 2)
4. Slide the FUNCTION switch to a selected Mode that you want to record;
4.1. If recording from a CD disk : Place the CD/CD+G disc onto the CD compartment and
search the desired music track. Then press the PLAY/PAUSE button to start playing;
4.2. If recoding from Bluetooth connection : Refer to Bluetooth Operation section for
pairing, then select the music track.press the PLAY/PAUSE button to start playing;
4.3. If recoding from Aux In: Connect to an external device to the 3.5mm AUX IN jack. (with
the supplied AUX IN cable), then activate your device to start playing;
5. After the above setting procedures, press the REC. button to start recording and the
word "REC..%"will show up on screen;
6. To stop recording, press the REC. button once;
7. Record Playback :
Return to FUNCTION Switch and slide to USB mode,then press the PAGE +& - to
" REC" folder playback, the last recorded song defaults in the end of the recording list.
Press ( SKIP
button to start playing the recorded file.
/
) to pick the last file which you just recorded. press ( PLAY/PAUSE
12
)
