Idiomas disponibles
Idiomas disponibles
• Children aged from 3 years and less than 8 years shall not plug
in, regulate and clean the appliance or perform user maintenan-
ce.
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental ca-
pabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance
in a safe way and un derstand the hazards involved.
• Children should not play with the product.
• This appliance must not be used connected to a programmer, timer
or another device that controls heater connection automatically.
Power selection knob
Positions of the power selector knob (Fig. 3).
Stop.
Cold air (blue)
Low Power Heating 1.000 W
High Power Heating 2.000 W
Anti-frost (Thermostat command)
Start-up
(When start-up the heater for the fi rst time.)
1. Please ensure that the supply voltage is in accordance with the product rating plate
2. Put the appliance plug into a socket.
3. Turn the thermostat knob (Fig.2) in a clokwise direction, to the maximum position.
4. Select the Heating Power required: Low Power 1.000 W; High Power 2.000W (Fig.3)
5. Once the desired temperature in the room has been archieved turn the thermostat
knob in an anticlockwise direction until a soft click is heard and the unit switches off.
From then on the heater will automatically select the temperature.
Frost device
The S&P heaters incorporates an anti-frost device that switches the unit on when the room
temperature falls to approx. 5ºC. To activate this device, follow the following instructions:
9 9
