Idiomas disponibles
Idiomas disponibles
4) PUTTING THE PRODUCT BACK IN SERVICE AFTER CLEANING
Remount the main unit (3) together with the damper (2) and embellisher cover (1) on the wall attachment (4i).
Attention: If you are cleaning several units at the same time, remount each main unit in the location you removed it from in
EN
order to avoid communication problems between master units and slave units.
4a) RESPIRO 100 N / RESPIRO 150 N
Simply reinstall the main wall unit and power up the product by turning it on with the master switch.
4b) RESPIRO 100 RD N / RESPIRO 150 RD N
Once you have put the main unit back in its wall housing, turn the product on with the master switch, to reset the cleaning
counter it is necessary to use the remote control (see the paragraph on resetting the fi lter alarm).
INSTRUCTIONS FOR CORRECT OPERATION
If you only have one unit, access the product using the "0/1" switch and then wait for the correct confi guration. After the red
and white confi guration pulse, the machine will start in the "AUTOMATIC" function.
If you have more than one unit, see the paragraph "MASTER-SLAVE PRODUCTS CONFIGURATION".
Attention: When fi rst turned on the product executes the auto-calibration of the hygrostat. It is possible that during this
phase the "EXTRACTION" function will be activated to bring the room's humidity below the level required for this auto-cali-
bration.
PROBLEMS ENCOUNTERED
'S&P's offi cial service network provides full technical assistance. If you note any anomaly in the device's operation, please
contact one of the above departments, who will be delighted to help you. Any handling not strictly necessary for the instal-
lation of the device, executed by parties other than offi cial S&P services, will force us to cancel the guarantee.
For any questions about S&P's products, please contact the Assistance Department.
TECHNICAL ASSISTANCE
If the product fails to turn on or it operates abnormally or is abnormally noisy, disconnect the product from the power by
positioning the "0/1" switch on the side of the main unit to "0". Contact your dealer immediately and request technical
assistance from our qualifi ed staff.
REMOVAL FROM SERVICE, DISPOSAL AND RECYCLING
EU regulations and our commitment to future generations oblige us to recycle used materials; please remember to
dispose of all unwanted packaging materials at the appropriate recycling points, and to drop off obsolete equipment
at the nearest waste management point.
S&P reserves the right to modify the product without prior notifi cation.
36
