Error Messages; Waste Disposal - Beninca HEADY Manual De Instrucciones

ERRoR mESSAGES

ERR1: Error, photocells, presence of an obstacle or non-powered photocells.
TRANSmiTTER REmoTE LEARNiNG
If the transmitter code is already stored in the receiver, the remote radio learning can be carried out (without accessing the control
unit).
IMPORTANT: The procedure should be carried out with gate in the opening phase, during the TCA dwell time.
Proceed as follows:
1 Press the hidden key of the transmitter, the code of which has already been stored in memory.
2 Within 5 seconds, press the already memorised transmitter key corresponding to the channel to be matched to the new transmitter.
The flashing light switches on.
3 Within 10 seconds, press the hidden key of the new transmitter.
4 Within 5 seconds, press the key of the new transmitter to be matched to the channel selected at item 2. The flashing light switches
off.
5 The receiver stores the new transmitter code and exits from the programming mode immediately.
DiAGNoSTiCS
P.P. PED
In the event of malfunctions, by pressing key + or - the status of all inputs (limit switches,
control and safety) can be displayed. One segment of the display is linked to each input.
In the event of failure it switches on according to the following scheme.
PHOT STOP

WASTE DiSPoSAL

If the product must be dismantled, it must be disposed according to regulations in force regarding the differentiated waste disposal and the
recycling of components (metals, plastics, electric cables, etc..).
For this operation it is advisable to call your installer or a specialised company.
16