CamPro Safe Trap Automatic Serie Manual Del Usuario página 9

2 Remove the mounting
bracket from the trap unit:
a) Press and hold the two
disassembly buttons on
the side of the trap unit
simultaneously
b) Slide the bracket off the trap
unit.
3 Remove the mounting
screws, rawl plugs and CO
cartridge from the mounting
bracket and put aside.
For mounting to a concrete
wall:
a) Drill two 6 mm holes
according to the holes in the
safety shield.
b) Insert the rawl plugs in the
drilled holes.
c) Screw the mounting bracket
with the safety shield to the
plugs in the wall.
For mounting to a wooden
wall:
a) Screw the mounting bracket
with the safety shield to the
wall.
4 Push the trap unit onto the
safety shield while angling
it slightly upwards until it
snaps into place
EN
2
7