Idiomas disponibles
Idiomas disponibles
Wear gloves when handling CO
4
CO
and to prevent human odour traces to the product.
2
Only use the original 16 / 25 gr CAMRO cartridges in the product otherwise
4
warranty is void.
8.
Service
8.1. Spare parts
For spare parts or replacements please check our website: https://camro.dk
8.2. Putting out of service.
1. Loosen the cartridge a quarter turn clockwise to let the pressure escape.
2. Turn the cartridge clockwise.
3. Pull the cartridge from the trap unit.
4. Remove the NFC reader from the trap unit.
5. Twist the lure basket from the trap unit.
6. Trigger the trap unit from above with a tool or key until the pin does not respond
anymore.
7. Slide the trap unit upwards to remove it from the mounting bracket.
8. Remove the safety shield from the trap unit.
9. Unscrew the screws to remove the mounting bracket from the wall.
10. Put the screws back into the wall mounting bracket.
11. Slide the wall mounting bracket on the trap unit to reassemble.
9.
Disposal
The product must be disposed of in accordance with the regulations in force in the
country in question at any given time. All larger plastic parts are marked with recycling
marks for correct sorting.
Screw the CO
2
into the trap.
Make sure you follow the steps above
4
quickly to prevent CO
cartridges to prevent from burning due to leaking
2
leakage
2
15
EN
