Idiomas disponibles
Idiomas disponibles
7.1. Maintenance schedule
•
Check every 2-3 weeks make sure the bait is not mouldy or stale. Replace the bait
when needed.
•
Clean the product when needed.
•
Check every 6 months whether the product is still securely mounted.
7.2. Maintenance procedure
6 Do not use petroleum-based lubricants.
6 Do not use aggressive chemical cleaning agents such as ammonia, acid or
acetone when cleaning the product.
6 Do not immerse the product in water.
1. Remove the CO
2. Remove the lure basket from the trap unit.
3. Trigger the trap unit with a tool or key until the pin does not respond anymore.
4. Clean the loose parts with a damp cloth and mild soap.
5. Dry the loose parts thoroughly before reassembling.
7.3. (Re)placement
7.3.1. Battery replacement of the NFC reader
When the battery of the NFC reader is empty, replace it with a new button cell
(CR2477).
1. Remove the NFC reader from the trap unit.
2. Unscrew the two screws from the base of the NFC reader. Put the two screws aside.
3. Carefully pull the NFC top cover from the NFC base.
4. Replace the button cell battery
Observe the plus (+) and minus (–) marks on the cell and product and ensure
4
correct use.
Do not use any cell or battery that is not designed for use with the product.
4
Dispose of the cell or battery properly.
4
5. Align the line of the NFC top cover with the line of the NFC base.
6. Carefully press the NFC top cover to the NFC base
7. Use the two screws to reassemble the NFC reader
8. Mount the NFC reader to the trap unit.
7.3.2. Bait replacement
To attract rodents to the product you need to use bait they are familiar with and strong
smell to it.
Use only solid types of bait. See https://www.camro.dk/ for a wide selection of non-
toxic baits.
7.3.3. CO
cartridge replacement
2
14
cartridge from the trap unit.
2
1
Loosen the cartridge a quarter turn
clockwise to let the pressure escape.
2
Turn the cartridge clockwise.
3
Pull the cartridge from the trap unit.
