English
1.
Turn the valve stems to the off position (1).
2.
Install the handles.
Secure the handle to the valve by rotating the
escutcheon clockwise (2).
Inspect the alignment of the handles.
If it is unsatisfactory, loosen the screws and rotate
the valve (1).
Tighten the tensioning screws using a screwdriver
(2).
1.
2.
39133 / 39135XX1 only: Install the pull rod.
Install the fiber washer, metal washer, and mount-
ing nut on the spout assembly.
Tighten the mounting nut.