Idiomas disponibles
Idiomas disponibles
Programming FAAC SLH 433/ 868 MHz transmitters
Once you have selected the brand, you can then proceed to programme the transmitters in the receiver.
CODE/1
1st Channel
x1
Press the CODE button once, the L1 led (channel 1) will flash in series of 2 flashes per second.
Press the P1 and P2 buttons on the FAAC transmitter until the transmitter LED starts flashing.
Press the button on the transmitter to be programmed for 1 second.
The L1 LED will light up, indicating successful programming.
Repeat the process for other buttons or transmitters.
CODE/1
2nd Channel
x2
Press the CODE button twice, the L2 led (channel 2) will flash in series of 2 flashes per second.
Press the P1 and P2 buttons on the FAAC transmitter until the transmitter LED starts flashing.
Press the button on the transmitter to be programmed for 1 second.
The L1 LED will light up, indicating successful programming.
Repeat the process for other buttons or transmitters.
Cancellation of a programmed transmitter
DEL/2
1st Channel
5 S
Press and hold the DEL button for 5 seconds, the L1 LED will start flashing once per second.
Press the button of the transmitter you want to delete from the receiver memory.
The L1 led will light up indicating successful button cancellation.
DEL/2
2nd Channel
5 S
Press and hold the DEL button for 5 seconds.
The L1 led will start flashing once per second.
Press the DEL button once again, the L2 led will start flashing.
Press the transmitter you want to cancel from the receiver memory.
The L2 led will light up indicating successful button cancellation.
Resetting the remote control memory
PLEASE NOTE THAT THIS PROCESS IS IRREVERSIBLE
DEL/2
5s
5s
L1 L2
L1
1x/s
Press and hold the DEL button for 10 seconds.
The L1 led will start flashing once per second, wait until both LEDs are lit.
Release the DEL button.
L1
2x/s
L1
2x/s
L1
1s
1x/s
DEL/2
L1
L2
1x/s
1x
DEL/2
DEL/2
L1
L1
L1
1s
L1
L1
L1
1s
L1
L2
1s
1x/s
22
