Idiomas disponibles
Idiomas disponibles
Description of the receiver and connections
CODE/1
DEL/2
3
REC_PRO
L1
L2
VCC GND NO COM NC
NO COM NC
ANT
Notes:
To connect the REC_PRO
receiver to the automation,
refer to its manual.
Example of connection to automation
Once you have selected the model suitable for the frequency of the controls you wish to program, connect the receiver to the
automation.
Refer to the automation manual for further details on connection to the automation.
The receiver must be connected to the automation by qualified personnel.
Disconnect the power supply to the automation before connecting it.
Never connect the receiver to the automation with the power supply connected, as this could result in unintentional operation or
short circuits, endangering the safety of persons and property.
Buttons
4
CODE/1
DEL/2
3
4
Conections
VCC
GND
NO
COM
NC
NO
COM
NC
L1
L2
Function
Controls programming button and digit no. 1
Controls programming button and digit no. 2
Numeric button n°3
Numeric button n°4
Description
Positive power supply 12 ~ 24 Vdc
Negative supply
Normally open contact output of channel 1
Channel 1 common contact output
Normally closed contact output of channel 1
Normally open contact output of channel 2
Channel 2 common contact output
Normally closed contact output of channel 2
Signalling LED 1st channel
Signalling LED 2nd channel
19
GND ( Common )
P/P ( Drive input )
GND ( Negative )
+24Vdc ( Positive )
