Idiomas disponibles
Idiomas disponibles
Sound levels in the specification are determined according to international standards. The figures
represent normal use for the tool in normal working conditions. A poorly maintained, incorrectly
assembled, or misused tool, may produce increased levels of noise and vibration.
www.osha.europa.eu provides information on sound and vibration levels in the workplace that may
be useful to domestic users who use tools for long periods of time.
General Safety
WARNING: When using electric power tools, basic safety precautions should always be
followed to reduce the risk of fire, electric shock and personal injury including the following safety
information. Read all these instructions before attempting to operate this product and save these
instructions for future use.
WARNING: This appliance is not intended for use by persons (including children) with reduced
physical or mental capabilities or lack of experience or knowledge unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children must be supervised to ensure that they do not play with the appliance.
CAUTION: Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the power tool for
operations different from those intended could result in a hazardous situation.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1 Keep work area clear - Cluttered areas and benches invite injuries
2 Consider work area environment
Do not expose tools to rain
Do not use tools in damp or wet locations
Keep work area well lit
Do not use tools in the presence of flammable liquids or gases
3 Guard against electric shock - Avoid body contact with earthed or grounded surfaces
(e.g. pipes, radiators, ranges, refrigerators)
4 Keep other persons away - Do not let persons, especially children, not involved in the work
touch the tool or the extension cord and keep them away from the work area
5 Store idle tools - When not in use, tools should be stored in a dry locked-up place, out of
reach of children
6 Do not force the tool - It will perform the job better and safer at the rate for which it
was intended
7 Use the right tool - Do not force small tools to do the job of a heavy duty tool
Do not use tools for purposes for which they are not intended; for example do not use
circular saws to cut tree limbs or logs
8 Dress appropriately
Do not wear loose clothing or jewellery, which can be caught in moving parts
Suitable safety footwear is recommended when working outdoors.
Wear protective covering to contain long hair
9 Use protective equipment
Use safety glasses
Use face or dust mask if working operations create dust
WARNING: Not using protective equipment or appropriate clothing can cause personal injury
or increase the severity of an injury.
10 Connect dust extraction equipment - If the tool is provided for the connection of dust
extraction and collecting equipment, ensure these are connected and properly used
11 Do not abuse the power cable - Never pull the power cable to disconnect it from the socket.
Keep the power cable away from heat, oil and sharp edges. Damaged or entangled power
cables increase the risk of electric shock
12 Secure work - Where possible use clamps or a vice to hold the work. It is safer than using
your hands
13 Do not overreach - Keep proper footing and balance at all times
14 Maintain tools with care
Keeping cutting tools sharp and clean makes the tool easier to control and less likely to
bind or lock in the workpiece
Follow instructions for lubricating and changing accessories
Inspect tool power cables periodically and have them repaired by an authorised service
facility if damaged
Inspect extension cables periodically and replace if damaged
Keep handles dry, clean and free from oil and grease
WARNING: Many accidents are caused by poorly maintained power tools.
15 Disconnect tools - Disconnect tools from the power supply when not in use, before servicing,
and when changing accessories such as blades, bits and cutters
WARNING: The use of accessories or attachments not recommended by the manufacturer may
result in a risk of injury to persons.
16 Remove adjusting keys and spanners - Form the habit of checking to see that keys and
adjusting spanners are removed from the tool before switching it on
17 Avoid unintentional starting - Ensure switch is in "OFF" position when connecting to a mains
socket, inserting a battery pack, or when picking up or carrying the tool
WARNING: Unintended starting of a tool can cause major injuries.
1800W Bench Planer
18 Use outdoor extension leads - When the tool is used outdoors, use only extension cords
intended for outdoor use and so marked. Use of an extension cable suitable for outdoor use
reduces the risk of electric shock
19 Stay alert
Watch what you are doing, use common sense and do not operate the tool when you are tired
Do not use a power tool while you are under the influence of drugs, alcohol or medication
WARNING: A moment of inattention while operating power tools may result in serious
personal injury.
20 Check damaged parts
Before further use of tool, it should be carefully checked to determine that it will operate
properly and perform its intended function
Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting
and any other conditions that may affect its operation
A guard or other part that is damaged should be properly repaired or replaced by an authorised
service centre unless otherwise indicated in this instruction manual
Have defective switches replaced by an authorised service centre
WARNING: Do not use the tool if the on/off switch does not switch it on and off. The switch
must be repaired before the tool is used.
21 Have your tool repaired by a qualified person - This electric tool complies with the relevant
safety rules. Repairs should only be carried out by qualified persons, otherwise this may
result in considerable danger to the user
WARNING: When servicing use only identical replacement parts.
WARNING: If the power cable is damaged it must be replaced by the manufacturer or an
authorised service centre.
22 Power tool mains plugs must match the mains socket - Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and
matching sockets will reduce risk of electric shock
23 If operating a power tool outside use a residual current device (RCD) - Use of an RCD
reduces the risk of electric shock
Note: The term "residual current device (RCD)" may be replaced by the term "ground fault circuit
interrupter (GFCI)" or "earth leakage circuit breaker (ELCB)".
24 When used in Australia or New Zealand, it is recommended that this tool is ALWAYS
supplied via Residual Current Device (RCD) with a rated residual current of 30mA or less
25 Use proper extension cord. Make sure your extension cord is in good condition. When
using an extension cord, be sure to use one heavy enough to carry the current your product
will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and
overheating
26 Never leave the tool running unattended. Turn power off. Don't leave the tool until it comes
to a complete stop
Even when used as prescribed it is not possible to eliminate all residual risk factors. Use with
caution. If you are at all unsure of the correct and safe manner in which to use this tool, do not
attempt to use it.
WARNING: Before connecting a tool to a power source (mains switch power point receptacle,
outlet, etc.) be sure that the voltage supply is the same as that specified on the nameplate of the
tool. A power source with a voltage greater than that specified for the tool can result in serious injury
to the user, and damage to the tool. If in doubt, do not plug in the tool. Using a power source with a
voltage less than the nameplate rating is harmful to the motor.
Cutting Tool Safety
Use the correct cutting tool
• Ensure the cutting tool is suitable for the job. Do not assume a tool is suitable without checking
the product literature before use
Protect your eyes
• Always wear appropriate eye protection when using cutting tools
• Spectacles are not designed to offer any protection when using this product; normal lenses
are not impact resistant and could shatter
Protect your hearing
• Always wear suitable hearing protection when tool noise exceeds 85dB
Protect your breathing
• Ensure that yourself, and others around you, wear suitable dust masks
Protect your hands
• Do not allow hands to get close to the cutting wheel or blades. Use a suitable push stick for
shorter workpieces with appropriate power tools
Be aware of others around you
• It is the responsibility of the user to ensure that other people in the vicinity of the work
area are not exposed to dangerous noise or dust and are also provided with suitable
protective equipment
silverlinetools.com
7
