Idiomas disponibles
Idiomas disponibles
Hot parts.
Items being welded generate and hold high heat and can cause severe burns. Do not touch hot parts with bare hands.
Allow a cooling period before working on the welding gun. Use insulated welding gloves and clothing to handle hot parts
and prevent burns.
EMC device classification
Radiation Class A Device
Only can be used in the industrial area. If it is used in other area, it may cause connection and radiation problems of
circuit.
Radiation Class B device
t can meet the radiation requirements of residential area and industrial area. It also can be used in residential area which
power is supplied by public low voltage circuit. EMC device can be classified by power nameplate or technical data.
ELITE COMPACT 160 - SI6160MDV
EMC measure
In the special situation, the specified area may be affected, the standard of radiation limit value has been complied with
(e.g.: The device, which is easy effected by electromagnetism, is used at the installation location, or there is radio or TV
near the installation location). In this condition, the operator should adopt some appropriate measures to remove interference.
According to the domestic and international standards, the ambient devices' electromagnetism situation and anti-interference
ability must be checked ：
• Safety device
• Power line, Signal transmission line and Date transmission line
• Date processing equipment and telecommunication equipment
• Inspection and calibration device
The effective measures avoid the problem of EMC ：
a) Power source
Even though the power source connection meet rules, we still need to take additional measure to remove the electromagnetic
interference. (e.g.: Use the right power filter. )
b) The welding line
• Try to shorten the length of cable
• Put the cable together
• Be Far away from other cable
c) Equipotential connection
d) Ground connection of work-piece
• When necessary, use appropriate capacitance to connect the ground.
e) Shielding, when necessary
• Shield the ambient devices
• Shield the whole welding machine
KEEP WORKiNG
KEEP WORKiNG
Keep Working
welding machine belong to Class A.
05
S i
6 1 6 0
m D v
