Idiomas disponibles
Idiomas disponibles
Programming
Set the Date and Time
1. Turn dial to DATE/TIME.
<
>
2. Press
or
button to select the setting to change.
–
+
3. Press
or
button to change the setting value.
Change the Time Format (12- or 24-Hour)
>
1. With MINUTES blinking, press
button.
–
+
2. Press
or
button to select the desired time format, then press
return to the time setting.
Set Watering Start Times
Up to four start times are available for each program.
1. Turn dial to START TIMES.
2. Press PROGRAM SELECT button to choose the desired program (if necessary).
<
>
3. Press
or
button to select an available start time.
–
+
4. Press
or
button to set the selected start time (ensure the AM/PM setting
is correct).
>
5. Press
to set additional start times.
Set Station Run Times
Run times can be set from one minute up to six hours.
1. Turn dial to RUN TIMES.
2. Press PROGRAM SELECT button to choose the desired program (if necessary).
<
>
3. Press
or
button to select a station.
–
+
4. Press
or
button to set the run time for the selected station.
>
5. Press
button to set additional station run times.
Set Watering Days
Set watering to custom days, or watering to occur on specific days of the week.
1. Turn dial to RUN DAYS.
2. Press PROGRAM SELECT button to choose the desired program (if necessary).
–
+
3. Press
or
button to set the selected (blinking) day as either ON or OFF,
and to automatically move to the next day.
<
>
4. You can press
or
button at any time to move the cursor to the previous
or next day.
Set watering to occur on odd or even calendar days.
1. Turn dial to RUN DAYS.
2. Press PROGRAM SELECT button to choose the desired program (if necessary).
<
>
3. Press and hold
and
buttons at the same time until ODD or EVEN is
displayed.
Set watering to cyclic watering, or watering occur at specific intervals.
1. Turn dial to RUN DAYS.
2. Press PROGRAM SELECT button to choose the desired program (if necessary).
3. On the custom days screen, press
(after SUN).
–
+
4. Press
or
button to set the desired day cycle, then press
–
+
5. Press
or
button to set the days remaining before the cycle begins. The
next watering day updates on the display to indicate the day that watering
will start.
NOTICE
>
If Sunday is selected,
will enter and activate cyclic watering. If this is not
>
desired, press the
button again to return to watering by custom days.
Run a Single Program
Start watering immediately for one program.
1. Turn dial to AUTO RUN.
2. Press PROGRAM SELECT button to choose the desired program (if necessary).
>
3. Press and hold
button to start the selected program.
During manual watering, the display shows a blinking
station number or program, and the remaining run time. To cancel manual
watering, turn dial to OFF for three seconds until the screen shows OFF.
Normal Operation
AUTO RUN
Turn dial to AUTO RUN for watering programs to run according to schedules.
During watering, the display shows a blinking
and the remaining run time.
OFF
Turn dial to OFF to stop automatic irrigation or to cancel all active watering
immediately.
NOTICE
Watering will NOT occur if the controller remains in OFF.
>
button to
>
button until the cyclic screen is displayed
>
.
symbol, the active
symbol, the current program
Manual Watering
Test All Stations
Start watering immediately for all programmed stations.
1. Turn dial to MANUAL STATION.
–
+
2. Press
or
button to set a run time.
>
3. Press and hold
button or turn dial to AUTO RUN to start manual station test.
Run a Single Station
Start watering immediately for a single station.
1. Turn dial to MANUAL STATION.
>
2. Press
button to display the MANUAL STATION screen.
<
>
3. Press
or
button to select a station.
–
+
4. Press
or
button to set a run time.
>
5. Press and hold
button or turn dial to AUTO RUN to start the selected station.
Delay Watering
Rain Delay
Suspend watering for up to 14 days.
1. Turn dial to AUTO RUN, then press and hold
–
+
2. Press
or
button to set the days remaining. The next watering day will
update on the display to indicate when watering will resume.
3. To cancel a rain delay, set the days remaining back to 0.
Permanent Days Off
Prevent watering on selected days of the week (for odd, even or cyclic
programming only).
1. Turn dial to RUN DAYS.
2. Press PROGRAM SELECT button to choose the desired program (if necessary).
3. Press and hold PROGRAM SELECT button.
+
4. Press
button to set the selected (blinking) day as a permanent day off or
+
press
button to leave the day on.
Season Adjust
Change the watering duration (from 5% to 200%) for all zones associated with
run times.
1. Turn dial to SEASON ADJUST.
–
+
2. Press
or
button to increase or decrease the global percentage setting.
3. To adjust an individual program, press PROGRAM SELECT button to choose
the desired program (if necessary).
NOTICE
To use season adjust correctly, ensure the schedule is set to the maximum time
that would be needed for the time of the year that requires the most watering,
which is typically the hottest/driest time of the year.
Rain Sensor
Set the controller to obey or ignore a rain sensor. When set to ACTIVE, automatic
irrigation will be suspended if rainfall is detected. When set to BYPASS, all
programs will ignore the rain sensor.
1. Turn dial to SENSOR.
–
+
2. Press
or
button to select ACTIVE (obey) or BYPASS (ignore).
Controller Reset
If the controller is not working properly, you can try pressing RESET.
Insert a small tool, such as a paper clip, into the RESET access hole and press
until the controller is reset. Previously programmed watering schedules will not
be affected by the reset.
Remote Accessories (optional)
Rain Bird TRU Controllers are upgradeable to
WiFi-based remote monitoring and control
via Apple® iOS® or Android™ mobile devices
with the addition of a LNK2 WiFi Module
(sold separately). For more information on the
LNK2 WiFi Module, visit wifi.rainbird.com.
Apple is a trademark of Apple Inc, registered in the U.S. and other countries. iOS is a trademark of
Cisco Systems Inc. Android is a trademark of Google LLC.
+
button.
3
