Idiomas disponibles
Idiomas disponibles
Grill Bake/Roast Power
Defrost
Air Fry
Tone ON/OFF
Microwave Cook Timer/
Menu Clock Clean
8
MICROWAVE OVEN CONTROL
Quantity
Weight - lbs
Weight - Oz
Door Lock
Steam
Display
When power is first supplied to the microwave oven, "12 Hr" will
appear in the display. User can press Timer/Clock button or
"+/-" button to toggle between 12 Hr or 24 Hr within 10 seconds.
Press Start button to confirm. If the "12:00" appears in the
display at any other time, a power failure has occurred. Reset
the clock if needed. See the "Clock" section.
Standby mode
When no functions are being used, the microwave oven will
switch to Standby mode.
After function selection, press the Stop/Unlock button to exit the
function selection. If you again press the Stop/Unlock button it
will be a invalid, as cooking mode is not activated.
When cooking mode is activated and the user presses the
Stop button, the Stop/Unlock functions will be triggered at the
same time. Press the Stop/Unlock button again to cancel the
function and return to Standby mode.
The Start button begins any function. If non-sensor cooking
is interrupted by opening the door, pressing Start button will
resume the cycle.
NOTE: To avoid unintentional operation of the microwave oven,
a cooking function cannot be started if the microwave oven door
has been closed for about 1 minute. The word "door" will appear
in the display until the door is opened and closed.
Quick Start/Add 30 seconds
In standby mode, pressing Start automatically starts the
microwave oven at 100% power for 30 seconds and adds
30 seconds of cook time, with each additional touch of the
control. Time may be added to any manual cooking cycle in
30 second increments, at the moment power level, by pressing
Start button during cooking.
Stop/Unlock
The Stop/Unlock button clears any incorrect command and
cancels any program during cooking. Press the
Stop/Unlock button to stop the cycle. It will not erase the time of
day.
The microwave oven will also turn off when the door is opened.
Close the door and press Start to resume the cycle.
To use Non-Sensor Menu
(Popcorn, Potato)
1. Place food on the turntable and close the door.
2. Touch desired menu control. The first programmed amount
will appear in the display. Touch control keypad repeatedly or
touch number keypads to change quantity.
3. Touch Start. When the cycle ends, "END" will appear in the
display and the end-of-cycle tone will sound.
4. Touch Stop/Unlock or open the door to clear the display.
Start
