Idiomas disponibles
Idiomas disponibles
Switching on and off
Switching on and off
The CBA47 can be switched on and off as
follows:
Switching on/off with the ON/OFF
button
u
For switch-on, briefl y press the ON/
OFF button 1.
The blue dot in the button and the button
illumination light up.
The previous settings are activated.
The device plays with the volume previously
listened to.
Note:
For safety reasons, the volume at
switch-on can be lower than the volume
at switch-off.
u
To switch off the device, press the
ON/OFF button 1 for longer than
2 seconds.
Switching on/off with microphone 1
Even if the device is switched off, you can
still switch the CBA47 on and off using mi-
crophone 1.
This requires that the microphone is prop-
erly connected to the CBA47 (chamber D).
Connecting the sources
For playback in the cabin area, you can con-
nect a radio, CD player or CD changer and
a video player as an external source to the
CBA47.
After switching on the CBA47, the radio
connection (chamber C1 pin 6) is supplied
with +12 V.
Note:
When connecting the voltage of the
radio to the CBA47, also observe the
connection notes in the operating in-
structions of the radio. No loudspeak-
ers may be used directly at the radio.
u
Switch on the radio.
The playback of the radio occurs only in the
cockpit area.
u
First, adjust a base volume and the
sound playback (for the cockpit) at the
radio.
Source selection
The buttons VIDEO 6, AUDIO 7 and
AUX 9 are used for source selection in
the cabin area.
The selected source is indicated by an in-
creased brightness of the button.
Radio source
To select the radio playback in the cabin
area
u
press the AUDIO button 7.
Connection the sources
13
