Idiomas disponibles
Idiomas disponibles
1
2
3
1
2
3
4
5
6
1. Inspect the rope protector for any holes, tears, or other damage that could allow the rope lifeline to come into contact with an edge.
2. Inspect the kernmantle rope lifeline for any damage including but not limited to fraying, cuts, sheath damage, chemical exposure, heat exposure, melting,
damage to end terminations, soiled condition, or buildup of paint and/or other contaminants.
3. Inspect the device body for any damage to the housing, rope lock, belays, swivel connection, missing or broken screws, bent or broken rope hooks, correct
snap hook operation, excessive soil, paint, or other contaminants. During inspection, hang the device and pull 6 ft. of the rope lifeline through the assembly
to ensure smooth operation. If the rope does not move freely through the device, remove from service and contact Safewaze for service or replacement.
4. Inspect the cross arm strap for excessive wear, broken stitching, hardware serviceability, wear sleeve degradation, exposure to excessive heat, welding slag,
chemical contamination, or excessive soiling.
5. Inspect the carry bag for any tears, holes, or other damage that would allow components to possibly drop, or fall out of the bag.
FIGURE 21 - INSPECTION DIAGRAM
4
FIGURE 22 - INSPECTION DIAGRAM
7
8
9
V3.0 2023 Copyright Safewaze
7
6
5
14
13
12
11
10
System Components
1
Bag
2
Rope protector
3
Cross arm strap
4
Rope carabiner
5
Rope
6
Rescue/Descent device
7
Swivel carabiner
System Components
1
Gear bag
2
Pole bag
3
Pole Head Bracket
4
Rescue Pole
5
Rope protector
6
Cross arm strap
7
Web Connector
8
Pick-off carabiner
9
Tool Tether
10
Tool Attachment
11
Rope carabiner
12
Rope
13
Rescue/Descent Device
14
Swivel carabiner
14
