Idiomas disponibles
Idiomas disponibles
ENGLISH
Operation
1.
Place the fan on a flat and stable surface.
2. Make sure the speed knob is in the off position.
3. Connect the power cable to an earthed plug socket. Make sure that the mains voltage
matches the voltage stated on the product marking.
4. Adjust the fan to the height that suits you best.
5. Select the desired speed. 1 (Low), 2 (High).
6. Switch off the fan by setting the speed knob to the 0 position.
7.
Unplug the fan when not in use.
Wall assembly
1.
Drill two holes on the wall where the fan is to be placed.
2. Screw the fan to the wall with suitable screws (not included). The holes for this are on the
base of the fan as shown in figure 2.
3. Allow the screw heads to protrude about 1 cm.
4. Hang the fan by the screws and adjust as necessary.
4. CLEANING AND MAINTENANCE
-
The appliance contains no user serviceable parts, so it requires little maintenance. Do not
attempt to disassemble the fan. The fan does not need additional lubrication.
-
Before cleaning the product, unplug it from the wall socket. Clean it with a soft cloth.
-
Make sure that dust does not accumulate in the grilles or ventilation openings. You can use
a vacuum cleaner to keep them clean.
-
Clean the fan with a cloth dampened with soapy water. Always unplug the appliance from
the mains before cleaning.
Please note: do not allow water to enter the fan; this could result in electric shock.
Dry the fan completely with a cloth and check that all parts are dry before switching it on.
5. TECHNICAL SPECIFICATIONS
Product reference: 08197
Product: EnergySilence 900 FloorFlow
Voltage: 220 V~240 V
Power: 30 W
Frequency: 50-60 Hz
30
ENERGYSILENCE 900 FLOORFLOW
