TFA 60.3055 Instrucciones De Uso página 8

TFA_No. 60.3055_Anl_03_24
Bathroom clock
4. Elements
A 1: Clock
A 3: Screw cover
A 5: Battery compartment
A 7: 3 suction cups
5. Getting started
• Remove the plastic casing.
• Put the clock upside down on the palm of your hand.
• Turn the cover a little bit in direction of the arrow (OPEN) and remove it.
• Insert a new battery AA 1,5 V, ensure that the battery polarities are correct.
• Set the time by turning the dial.
• Close the cover carefully, paying special attention to the sealing ring.
• The device is ready for use.
• Put the clock back in the plastic casing.
6. Mounting
• Place the device horizontally on a flat surface with the integrated feet.
• The suction cups can be used on flat surfaces only. Please do not detach it by
pulling the housing. Remove the suction cups carefully with your fingers.
• Attention:
Due to high humidity in the bathroom, it may be that the suction cups will lose
their hold.
14
20.03.2024 16:37 Uhr Seite 8
A 2: Plastic casing
A 4: Dial for time
A 6: Integrated feet
Bathroom clock
7. Care and maintenance
• Clean the device with a soft damp cloth. Do not use solvents or scouring
agents.
• Remove the battery if you do not use the device for a long period of time.
• Keep the device in a dry place.
8. Troubleshooting
Problem Solution
➜ Ensure that the battery polarity is correct
Clock hands do not move
➜ Change the battery
➜ Change the battery
Incorrect indication
If your device fails to work despite these measures, contact the retailer where
you purchased the product.
9. Waste disposal
This product and its packaging have been manufactured using high-grade materials
and components which can be recycled and reused. This reduces waste and pro-
tects the environment.
Dispose of the packaging in an environmentally friendly manner using the collec-
tion systems that have been set up.
15