Idiomas disponibles
Idiomas disponibles
FUNCTIONS
Tuning
Briefly press
(1) to activate auto
search. Press and hold until "Manual..." is
displayed; you are now in manual mode.
The unit returns to auto search mode and
"AUTO..." is displayed if no button is pressed
for a few seconds.
Auto Search & Save
- Auto save function. Press and hold AS/PS
(20), "SEARCH" is displayed. The radio
scans the frequencies and measures the
signal strength during one seach cycle.
The 6 strongest stations are saved in the
preset memory.
- Briefly press AS/PS (20) to recall a preset
station. The corresponding preset number
P1~P6 is displayed.
SCAN
Press SCAN (18) to access search mode
and to scan for a strong station. The unit
plays the station and the frequency flashes
five times on the display).
Presets
Press one of the number buttons (1-6) to
select a preset station. Press and hold (until
a second beep sounds) to store the current
station under the selected preset number.
ANS (Announcement Name Station)
Operation
- Set ANS mode: Briefly press AF (21) to
activate/deactivate ANS mode. "ANS" is
displayed, if activated.
- Press PTY (17) to access PTY select
mode; the station name is displayed. Turn
the volume knob (26) to select a station or
press
(1) to find the desired chan-
nel.
1. Pess and hold PTY (8/9) to access the
ANS menu. In this menu use the volume
knob (26) to select the station and
tune into the station.
• TA-SEEK: SEEK/ALARM
a) TA SEEK mode:
If a new station does not broadcast TP
information for more than 5 seconds the
radio automatically tunes into the next sta-
tion with different Pl but same TP informa-
tion. If the current station temporarily loos-
es TP information and this stations is set
to RETUNE SHORT or RETUNE LONG,
then the radio tunes into the next station
with same Pl. If no Pl station is found after
one tuning cycle, then the radio tunes into
the next station with TP information.
Note: In TA SEEK mode the current sta-
tion can be replaced with a different sta-
tion, since the radio scans for a TP station
as soon as field signal or signal strength
are weak or the current station has no TP
signal (TP has higher priority than PI).
b) TA ALARM mode:
This mode deactivates automatic tuning.
A long dual beep tone sounds (ALARM).
This keeps the current station in this mode
(PI has higher priority than TP). The beep
tones sound if a new station does not
broadcast TP information for more than 5
seconds. If the current station temporarily
looses TP information the beep tone stops.
"PI SEEK" is repressed if a new station
has no ANS signal.
• MASK: DPI/ALL
MASK DPI mode: Marks only AF with dif-
ferent Pl (DPI). Mask ALL mode: Marks all
AF with different Pl and no ANS signal with
high field strength.
76
(1)
