Manuales relacionados para PRETUL ESMI-20P
Resumen de contenidos para PRETUL ESMI-20P
- Página 1 Manual Cordless angle grinder 20 V ” Disc Applies for: Code Model 28267 ESMI-20P ESMI-20P Read this manual thoroughly CAUTION Before using the tool.
- Página 2 Contents CAUTION Technical data Power requirements To get the most out of the tool, extend its lifespan, claim the General safety warnings for warranty if necessary, and avoid power tools serious risks or injuries, it is Safety warnings for the use of angle essential to read this manual in grinders its entirety before using the tool.
- Página 3 Technical data ESMI-20P Code 28267 Description Cordless angle grinder Discs 4 1/2” Voltage 20 V Speed 7 100 RPM IP Grade IP40 Size of threaded thread 5/8 - 11 - UNC - 1A Battery Ion-lithium 20 V 4 Ah Charging time: 117 min approx...
- Página 4 General Safety Warnings for Power Tools WARNING! Read all safety warnings and all instructions listed below carefully. Failure to follow any of them may result in electric shock, fire, and/or serious injury. Keep the warnings and instructions for future reference. Work area Remove any wrenches or adjusting tools before starting the Keep your work area clean, organized, and well-lit.
- Página 5 Use and Care of the Battery-Powered Tool In abusive conditions, battery liquid may be expelled; avoid Only recharge with the charger specified by PRETUL. contact. If accidental contact occurs, rinse with water. The charger included with the machine may pose a fire hazard if used with If the liquid meets the eyes, seek medical assistance.
- Página 6 Safety warnings When using a cordless angle grinder CAUTION • Ensure that the disc rotates freely. For instance, if a grinding wheel becomes snagged or caught by the • Do not tighten the disc too much; otherwise, it may break. workpiece, the edge of the wheel entering the snag point may WARNING •...
- Página 7 Safety warnings When using a cordless angle grinder Specific safety measures for Abrasive cutting operations a) Do not jam the cutting wheel or apply excessive pressure. Do not attempt excessive depth of cut. Overloading the wheel increases the load and susceptibility to twisting or jamming in the cut, also raising the risk of kickback or disc breakage.
- Página 8 Parts Auxiliary handle Spindle lock Handle Protection Switch guard 4 1/2” abrasive cutting disc Outer flange Wrench spanner Inner 2 prong flange Battery release button Switch Battery Auxiliary handle mounting holes Clamp lever Battery terminals Charger Charging indicators ENGLISH...
- Página 9 Preparation Battery charge 1. Connect the charger plug to a 127 V~ electrical outlet. (The green light on the charge indicator will turn on.) 2. Insert the battery into the charger by sliding it as shown. The green light will turn off, and the red light should turn on, indicating that the charging has started.
- Página 10 Assembly Protective guard assembly • Open the clamp lever and align the protruding parts inside the protective guard. Push the protective guard downward until the protruding parts engage and rotate freely with the corresponding slots on the shaft cover. • With the clamp lever open, rotate the protective guard to the desired working position.
- Página 11 Start Up The angle grinder is a handheld power tool used for grinding and cutting steel, pipes, angle iron, bricks, tiles, stone, and/or ceramic pieces; for removing burrs from metal surfaces, and for leveling and smoothing welds. Start up • Press the switch precisely into the pressure position (A). Then, push slightly downward and direct the pressure forward (B) without releasing it.
- Página 12 Maintenance General maintenance WARNING When using compressed air to clean particles, ALWAYS wear safety glasses with side shields or • Remember to remove the tool's battery before cleaning or a face shield. In case of expelling a lot of dust, also use a performing maintenance.
- Página 13 Authorized Service Centers In the event of any problem contacting a Truper Authorized Service Center, please see our webpage WWW.TRUPER.COM to get an updated list, or call our toll-free numbers 800 690-6990 or 800 018-7873 to get information about the nearest Service Center. AGUASCALIENTES DE TODO PARA LA CONSTRUCCIÓN MORELOS...
- Página 14 Model Brand 28267 ESMI-20P Duration: 1 year. Coverage: Parts, components, and labor are covered against manufacturing or operational defects, except when used under conditions other than normal, operated contrary to instructions, altered, or repaired by personnel not authorized by TRUPER. To activate the warranty, please present the product along with the sealed warranty, invoice, or receipt at the store where it was purchased.