WARNING! Read all safety warnings and all instructions listed below carefully. Failure to follow any of
them may result in electric shock, fire, and/or serious injury. Keep the warnings and instructions for future
reference.
Work area
Keep your work area clean, organized, and well-lit.
Cluttered and dim areas can lead to accidents.
Do not operate the tool in explosive atmospheres, such as in
the presence of flammable liquids, gas, or dust.
The electric tools produce sparks that can ignite flammable material.
Keep children and other individuals at a safe distance
while using the equipment.
Distractions can cause loss of control and lead to accidents.
Electrical Safety
Electrical tool plugs must match the outlet. Never modify the
plug in any way.
Do not use adapters with grounded electrical tools. Unmodified
electrical tools and matching plugs will reduce the risk of electric shock.
Avoid bodily contact with grounded surfaces, such as pipes,
radiators, stoves, and refrigerators.
There is an increased risk of electric shock if your body is grounded.
Water entering an electrical tool will increase the risk of electric
shock.
The entry of water into an electrical tool will increase the risk of electric shock.
Do not force the cable. Never use the cable for carrying, lifting,
or disconnecting the tool. Keep the cable away from heat, oil,
sharp edges, or moving parts.
Damaged or tangled cables increase the risk of electric shock.
If it is unavoidable to operate an electrical tool in a damp
location, use a power source protected by a Residual Current
Device (RCD).
The use of a Residual Current Device (RCD) reduces the risk of electric shock.
When operating an electrical tool outdoors, use an extension
cord suitable for outdoor use.
The use of a suitable outdoor-rated cable reduces the risk of electric shock.
Personal Safety
Be alert, watch what you are doing, and use common sense
when handling a tool. Do not use it if you are tired or under the
influence of drugs, alcohol, or medication.
A moment of distraction while using the tool can cause personal injury.
.
Use safety equipment. Always wear eye protection.
The use of safety equipment such as safety glasses, dust mask, slip-resistant
shoes, helmet, and ear protection in appropriate conditions significantly
reduces the risk of personal injury.
Avoid accidental starts. Ensure the switch is in the "off" position
before connecting to the power source and/or the battery or
transporting the tool.
Carrying power tools with your finger on the switch or connecting power tools with
the switch in the "on" position can cause accidents.
4
ENGLISH
General Safety Warnings
for Power Tools
Remove any wrenches or adjusting tools before starting the
power tool.
Wrenches or tools left on the rotating parts of the tool can cause personal
injury.
Do not exceed your range of motion. Keep both feet firmly
planted on the ground and always maintain balance.
This allows better control of the tool in unexpected situations.
Dress appropriately. Do not wear loose clothing or jewelry.
Keep your hair, clothing, and gloves away from
moving parts.
Loose clothes, jewelry, or long hair can get caught in moving parts.
If dust extraction and collection devices are available for the tool,
check their connections and use them correctly.
The use of these devices reduces risks associated with dust.
Tool Use and Care
Do not force the tool. Use the appropriate tool for the
task at hand.
The right tool performs better and is safer when used at the intended pace.
.
Do not use the tool if the switch is not functioning.
Any power tool that cannot be turned on or off is dangerous and must be
repaired before operation.
Disconnect the tool from the power source and/or battery
before making any adjustments, changing accessories, or
storing it.
These measures reduce the risk of accidentally starting the tool.
Store the tools out of the reach of children and do not allow
them to be handled by individuals unfamiliar with the tools or
their instructions.
Power tools are dangerous in untrained hands.
Maintain the tool. Ensure that the moving parts are not
misaligned or jammed, and that there are no broken parts or
other conditions that may affect its operation. Repair any
damage before using the tool.
Many accidents are caused by inadequate tool maintenance.
Keep cutting accessories sharp and clean.
Well-maintained cutting accessories are less likely to jam and easier to control.
Use the tool, its components, and accessories in accordance
with these instructions and as intended for the type of tool, in
appropriate working conditions.
Using the tool for applications other than those for which it is designed could
cause a hazardous situation.
.
