Idiomas disponibles
Idiomas disponibles
H O W T O U S E
USING THE CONTROLS
AUTO CLEAN
To turn the AUTO CLEAN function on, press
•
the AUTO CLEAN button while the air
It must be set each time you wish to run the
AUTO CLEAN function.
AUTO CLEAN is used to remove moisture from
the heat exchange coils. This helps prevent the
formation of mildew and odors.
To use AUTO CLEAN
1
With the air conditioner running in COOL,
D
RY or ENERGY SAVER mode,
press the AUTO CLEAN button.
2
AUTO CLEAN will be displayed in the
LED display.
Press the POWER button to turn the air
conditioner off. AUTO CLEAN will run
the fan with the compressor off for
a few minutes after the power is turned
off.
To cancel AUTO CLEAN, or to stop an
AUTO CLEAN cycle in process, simply press
the AUTO CLEAN button again. The
AUTO CLEAN function will not operate if the
air conditioner is already off.
14
conditioner is running in COOL,
DRY, or ENERGY SAVER
This function can only be
selected from the remote; it is not
available from the control panel.
AUTO SWING
AUTO SWING function can be activated with
the remote and control panel. When this function
mode.
remote again.
With AUTO SWING off, you may also manually
adjust the air discharge to the desired position.
It will maintain this position until the air
conditioner is turned off or AUTO SWING is
activated.
is on, the air discharge will
oscillate to circulate air more
evenly through the room. To turn
this function off, simply press the
AUTO SWING button with the
When the displayed temperature
is °C (or °F), you can press this
button to switch to °F (or °C).
