Gardena 9 V Instrucciones De Empleo página 17

4. STORAGE
To put into storage / Winter storage:
GARDENA Irrigation Valves are intended for outdoor
use and are only frost-proof to a limited extent. The
only way to protect your Irrigation Valves completely
is to remove the valves before the frosty season
begins. Alternatively, you can drain the pipeline sys-
tem upstream and downstream of the Irrigation
Valve.
Emptying the pipeline system UPSTREAM of
the valve [ Fig. O1 ]:
1. Turn off the tap and disconnect the hose
between the tap and the GARDENA Water
Connection Point Art. 8262 / 2722 / 2795.
This allows the air to flow freely, thereby draining
the supply line via the integrated Drain Valve
Art. 2760.
Requirement: The Drainage Valve must be
installed deeper than or at the same depth as
the Irrigation Valve.
2. If the watering system is directly connected to the
water tap, turn off the water supply and open the
venting tap.
GAR_01251-20.960.23_2024-03-15.indb 17 GAR_01251-20.960.23_2024-03-15.indb 17
q
3. Set the selection lever
position.
4. If you are using the GARDENA Valve Box V3,
make sure you open the integrated drain cap.
Emptying the pipeline system DOWNSTREAM
of the valve:
Requirement: The Drainage Valve must be
installed deeper than or at the same depth as
the Irrigation Valve.
v Install a GARDENA Drainage Valve Art. 2760
immediately after the valve.
The system is drained automatically via the the
GARDENA Drainage Valve.
Emptying the pipeline system
IN ITS ENTIRETY:
1. Turn off the tap and disconnect the hose
between the tap and the GARDENA Water
Connection Point Art. 8262 / 2722 / 2795.
2. Set the selection lever q
position.
of all valves to the "ON"
of all valves to the "ON"
17
15.03.24 08:03 15.03.24 08:03