Idiomas disponibles
Idiomas disponibles
ASSEMBLING THE BASE
1
Select flat, level area to set base/
umbrella. Remove Base Cover.
3
Fill base with sand and then add water
to saturate the sand. Please ensure the
protective sleeve is on the crank hole to
prevent the sand and water filled in. The
total weight of whole set base is
recommended to reach 353 lb / 160 kg.
5
Reinstall base cover and stem.
Do not overtighten stem, or parts
may be damaged.
2
J
protective sleeve
Insert the stem.
4
Remove the stem and the
protective sleeve.
6
M
Connect the rotation part with the tube.
4
ASSEMBLING THE BASE
7
N
L
Install the assembled rotation part to the base cover.
Please note: Make sure to fully fill the inside of the base substructure. If the base
is not fully filled, the base cover could be damaged when weight applies to the
base cover.
Remove the stem carefully (step 4) to avoid sand getting into the center of the base
shell. Fill the base completely with 243 lb / 110 kg sand, then add water to wet
down the sand.
Only use the base provided with this umbrella. Other bases may not fit with this
umbrella and could cause a safety issue. Make certain the base is securely placed
on flat surface before inserting the umbrella.
Operating Instruction to Lift and Move the wheels
8
9
11
12
1. Lift Wheels: Open the lid and move to aside, rotate the crank handle in clockwise
2 to 3 circles, then the base could be movable.
2. Lock the wheels: When the base is moved to the desired position, rotate the crank
handle counter-clockwise 2 to 3 circles to lock into place. Place lid back on.
10
Four wheels built in
5
