Idiomas disponibles
Idiomas disponibles
2
1
8
6
7
9
10
11
12
13
14
3
5
1. Cap
2. Diagonal Pole
3. Solar panel
4. Canopy
5. Supporting Rod
6. Battery case
7. Crank position for tilt
8. Crank position for opening and closing
9. Crank handle
10. Side Pole
11. Rotation Part
12. Tube
13. Inverted Base Stem
14. Base
2
CAUTION:
Place the base in the desirable location for use before filling with sand and water.
The umbrella should be lowered and secured in windy conditions or when not in use.
Do not leave open flame or heat sources unattended underneath the umbrella. Do not
allow children to remain unattended near the umbrella.
Risk of fire or burn. Do not short circuit, crush, incinerate, or disassemble the batteries.
Do not attempt to recharge batteries in inclement weather, to prevent damage to the
4
electrical components.
Only use the AC adapter provided with your Proshade umbrella. Using an adapter that
is not original to Proshade umbrella or Proshade components may increase risk of fire,
contact customer service for replacement parts if needed.
CARE INSTRUCTION:
Wash umbrella canopy with a mild solution of soap and water. Rinse thoroughly and
drip-dry in an open position. Do not use bleach or solvents on aluminum frame. Keep
closed when not in use.
AC Adapter:
Input: 100V~240V AC, Output: 5V DC
AC adapter can be used for indoor only.
UL Certification number is: E486164.
CAN ICES-3(B) / NMB-3 (B)
MAKE SURE TO REMOVE/ GET OFF THE BATTERY CASE TO RECHARGE
THE BATTERY.
3
