Idiomas disponibles
Idiomas disponibles
DISPLAY FUNCTIONS
−The
cooler
automatically
optimizes the water flow rate
to
deliver
maximum
and
temperature
drop
on surrounding air conditions.
◦ Eco − Use this mode if you
are in a very hot/dry climate
and are willing to sacrifice a
little cooling to consume less
water.
Water
flow
consumption
will
be
◦ Manual − This mode allows
for
precise
water
control to dial in your preferred
cooling experience. Settings 1-5
correspond to water flow rate from
low to high. It is recommended
for experienced users only.
4. Water Level Indicator
These LED indicators display the
reservoir's water level and give
warnings when the level is low.
All five indicator bars will be blue
when the reservoir is full. As the
cooling
water level drops and it's time to refill,
based
the last bar will illuminate yellow.
However, the system will continue
to cool. When the water level goes
below the minimum operating level
for the pump, the water empty
indicator light will illuminate red, and
rate
and
the power supply to the pump will
reduced.
be shut off. Refilling the reservoir will
allow the cooler to continue normal
flow
rate
operation.
5. Airflow Direction
This feature allows for automatic air
direction control to customize your
cooling experience. Note: APEX
500 and APEX 700 models only.
•
Navigate to 'Airflow' on the LCD
screen menu and use the <
> buttons to choose from one
of 3 Airflow direction modes:
◦ Sweep – The vertical louvers will
oscillate left to right to provide a
sweeping range of airflow. The
blue Airflow direction light will
remain illuminated in sweep mode.
◦
Narrow
–
The
channeled towards the center
for maximum velocity and reach.
◦ Wide – The louvers move outwards
to diffuse the air, providing a wider
coverage area of steady flow.
Note: You can customize your
cooling experience with precise
louver
control
by
CoolSync™ App!
6. Timer
Allows you to set an automatic run-
time duration.
•
To set a timer, navigate to the
'Timer' option on the LCD screen
airflow
is
using
the
