Webasto ProCore Edge 9 Manual De Operación Y Mantenimiento página 50

ProCore Edge North America
9.1.4.1. Single-Cable Connection
For a single-cable-connection, start by disconnecting the end of
the cable from the termination block located at the very bottom of
the charger. Then unplug the communications, starting from the
bottom power module, until the module to be replaced has been
disconnected. (Figure 28)
NOTE
The ribbon cable has a red edging to denote Pin 1. While facing the
module, always insert the connectors so the cable red line is on the left.
31241-03-0202
Figure 28 Single-Cable Connection
50 of 68
Webasto Charging Systems, Inc.
IOMM