Balluff BMP 02-P A-P Serie Manual De Instrucciones página 50

BMP 02- _ P _ _ _ _ _ A- _ _ _ _ - _ _ -P _ _ /P _ _ -S4/P _ _ -S75
Magnetic Field Positioning System
7
Analog interface, switching output and button (continued)
7.3 Settings using the buttons
The settings made using the touch-sensitive button apply
to operation with analog interface and IO-Link interface, as
well as for all BMP device variants.
Normal operation¹
Normal mode
2s
Setting mode
1
Minumum range
2
Maximum range
3
Characteristic
curve
4
Switching point
5
Switching point Switching point
logic logic
2)
6
Magnetic field
alignment
7
Factory settings
Explanation of normal operation, see chapter 4.3 on page 9
1)
Default is depending on order
2)
Fig. 7-6: Settings using the buttons
20 english
1)
after 20 s
inactivity
Blue
1x blue...
1x blue, 1x magenta...
2x blue...
2x blue, 1x magenta...
3x blue...
4x blue...
4x blue, 1x magenta...
Blue, long flashing
1x blue long, 1x magenta long...
2x blue long, 1x magenta long...
Red-yellow flashing
The touch-sensitive button can be deactivated
via IO-Link (see configuration guide at
www.balluff.com on the product page).
Press button
briefly
Setting successful
adjust
adjust
rising (default)
falling
adjust
NO contact
NC contact
automatic (default)
radial
axial
restore
Legend
2s
Hold down button
for 2 s
Setting error
4x Red
2s
4x Green
2s
4x Green
2s
4x Green
2s
4x Green
2s
4x Green
2s
4x Green
2s
4x Green
2s
4x Green
2s
4x Green
2s
4x Green
2s
4x Green