Idiomas disponibles
Idiomas disponibles
GB
Setting value for PIN code:
User has to configure values of the three digits with and
validate its choice with validation key.
Factory setting value: 000
Reset user settings:
Press and hold
for 5 seconds to reset, all segments light
up, showing that the thermostat has been reset with the
factory default setting:
• Set point temperatures in
• All user parameters with their factory values.
When button is hold:
holding
button
Zone number displaying:
This function is available only if digital thermostat is associ-
ated with a multi-zone receiver.
Displaying client software version:
Pressing and maintaining key
cation version and debug information.
Reminder: software version is written: Vxx.xx.
Professional menu:
This menu permits to access to installer parameter menus.
Pressing and maintaining key
installer menus.
When button is hold:
holding
button
User menu exit:
Press key
to exit user menu and return to the main
screen.
Value range: 000 to 999
Clearing user parameters
holding
button
displays software qualifi-
displays first parameter of
Accessing to installer parameters
holding
button
modes,
Clearing
is done
releasing
button
Installer
parameters
releasing
button
33
