Idiomas disponibles
Idiomas disponibles
3. FIRST INSTALLATION
See quick installation guide for installation.
Batteries installation.
• Open the cover and insert the 2 AAA
supplied batteries.
• Close the cover.
Thermostat pairing, RF wireless com-
munication initialization.
You must put your receiver or TECE touch
screen in radio pairing mode (refer to the
device leaflet).
On the back, push 5 sec the button for
direct access to initialization menu.
Following screens are displaying:
Other method from parameter menu:
1 Press
key to wake-up the thermostat
2 Press 5 sec
menu
Following screens are displaying:
Note:
After few seconds, the thermostat and the receiver/touch screen should exit from the RF
init mode, this is the normal procedure to confirm a correct pairing.
To make the installation easier, it will be better to have the thermostat near to the receiver
or touch screen during the configuration mode.
24
Going to wireless initialization menu
holding
button
key to enter parameter
holding
button
3 Press
key to enter in initialization
Initialization
starting
releasing
button
GB
