Idiomas disponibles
Idiomas disponibles
GB
7. USER PARAMETER DESCRIPTION
calibration has been performed yet. Enter the reading on your thermometer using the
keys
and
(step of 0.1 °C).
The setting is validated with key
Important note: a large temperature deviation may indicate an inappropriate instal-
lation of the thermostat. If the temperature difference is too big, this could mean your
thermostat was not installed properly e.g. in the right place.
NOTES: If user press simultaneously the keys
No is displayed.
Default value: no for offset of 0.0 °C
Range values: Yes: for offset included between -3.0 °C and 3.0 °C.
RF pairing activation:
Pressing the key
communication initialization:
Another press of key
will exit this mode.
Degree unity for displaying:
• °C: Celsius
• °F: Fahrenheit
Default value: °C
Buzzer activation:
"Yes": activation of function
"no": no activation
Default value: no
"basic navigation" mode:
"Yes": activation of function, restrict to comfort and off mode.
"no": no activation
Default value: no
Room temperature display:
"Yes": remote displays measured temperature
"no": remote displays set point temperature
Default value: Yes
Calibration of internal room sensor (remote):
Calibration must be done after a given order has been oper-
ating for a day. Place the thermometer in the middle of the
room at about 1.5 m above the floor. Record the tempera-
ture shown after 1 hour. When you enter calibration mode
for the first time, the indicator says "no", which means no
. YES appears to indicate that calibration.
starts
Values: °C / °F
Values: Yes / no
Values: Yes / no
Values: Yes / no
and
, sensor calibration is reset.
31
