Idiomas disponibles
Idiomas disponibles
EN
FM RADIO MODE
-
Select FM mode.
NOTE: To use this mode, you need to connect an antenna to FM ANTENNA on the rear panel.
-
Perform an automatic tuning of the stations to start using this mode by long pressing the button
-
Once finished, you can select the station you wish to listen to from among those already set with
USB MODE
-
Select USB mode.
-
Connect the USB device.
-
Press
and
to change the song or
-
You can change the play mode between repeat all (1 tone) and shuffle (2 tones) by long pressing the
button.
ZONE MICROPHONE INPUT
Input for connecting zone microphones such as the ZONEMIC-6 which can be used for announcing 1 or
more zones. These announcements may be live or recorded messages.
NOTE: up to a total of 4 ZONEMIC-6 microphone units can be cascaded, taking into account that the total
wiring may not exceed 200 metres, from the MAX-360Z amplifier to the last microphone in the installation.
The pinout of the female RJ45 connector of the MAX-360Z amplifier is:
CONNECTOR
PINOUT
FEMALE
T-568B
Pin 1
White-Orange
Pin 2
Orange
Pin 3
White-Green
Pin 4
Blue
Pin 5
White-Blue
Pin 6
Green
Pin 7
White-Brown
Pin 8
Brown
REMOTE WALL PANEL INPUT
On an audio input providing 15 V DC power. Normally for connecting a remote wall connection panel or the
output of a mixer/player. Due to its priority, this signal will not be mixed with the other signals of CH 1-5 or
AUX integrated in the amplifier.
The pinout of the female RJ45 connector of the MAX-360Z amplifier is:
CONNECTOR
PINOUT
FEMALE
T-568B
Pin 1
White-Orange
Pin 2
Orange
Pin 3
White-Green
Pin 4
Blue
Pin 5
White-Blue
Pin 6
Green
Pin 7
White-Brown
Pin 8
Brown
to pause/resume playback.
FUNCTION
audio+
Balanced
audio-
audio signal
GND
D+ (A)
RS485
communication
D- (B)
+15 V DC
GND
Power supply
-15 V DC
FUNCTION
audio +
Balanced L
audio -
channel
GND
audio +
Balanced R
audio -
channel
GND
+15 V DC
Power supply
GND
RJ45
8
7 6 5 4 3 2
1
RJ45
8
7 6 5 4 3 2
1
- 6 -
.
and .
PIN 8
PIN 1
PIN 8
PIN 1
