Wilo Yonos MAXO Instrucciones De Instalación Y Funcionamiento página 24

en
Immediately after completing work, all safety and protective devices
must be put back in position and/or recommissioned.
2.6 Unauthorised modification and manufacture of spare parts
Unauthorised modification and manufacture of spare parts will impair
the safety of the product/personnel and void the manufacturer's de-
clarations regarding safety.
• Only carry out modifications to the product following consultation
with the manufacturer.
• Only use original spare parts and accessories authorised by the
manufacturer.
The use of other parts will absolve the manufacturer of liability for
any consequences arising therefrom.
2.7 Improper use
The operational reliability of the supplied product is only guaranteed
if used as intended and in accordance with section 4 of the installa-
tion and operating instructions. The limit values must on no account
fall under or exceed those values specified in the catalogue/data
sheet.
3 Transport and temporary storage
3.1 Transport inspection
Check delivery immediately for damage and integrity. Where necessary make a complaint immediately.
CAUTION
Damage due to incorrect handling during transport and storage!
Protect the device from moisture, frost and mechanical damage during transport and tem-
porary storage.
3.2
Transport and storage conditions
• Store in original packaging.
• Protect against moisture and mechanical load.
• Permissible temperature range: -20 °C to +70 °C
• Relative humidity: maximum 95 %
24 Installation and operating instructions • Wilo-Connect Modul Yonos MAXO • Ed.03/2024-02