Echo Pro Attachment Serie Manual Del Operador página 24

SAFETY
blade binding.
3. Do not use blunt or damaged blades. Blunt or damaged blades increase
the risk of jamming or catching on an object resulting in blade thrust.
4. Always maintain good visibility of the material being cut. Blade thrust
is more likely to occur in areas where it is difficult to see the material being
cut.
5. If you are approached by another person while operating the
machine, switch the machine off. There is an increased risk of injury
to other persons being struck by the moving blade in the event of blade
thrust.
This section contains additional warnings and instructions
contained in UL 62841-4-2 and 62841-4- 4.
For grass trimmers, brush cutters, and brush saws, according to
the type of supplied cutting accessory:
◆
ALWAYS remove battery or unplug unit before adjusting guards or
handles.
◆
ALWAYS stop machine, remove battery and inspect if unit strikes a
hard object, or if excessive vibration is felt.
◆ Cutoff knife is sharp. Wear gloves to protect hands.
◆
Always hold throttle handle with right hand and support handle with
left hand, placing unit on right side of body.
◆
Assure all ventilation openings are clear of debris.
Note: To advance trimmer line, tap trimmer head against the ground while the
head is turning at normal operating speed.
Operation With Blades:
Metal blades are very sharp and can cause severe injuries, even if
unit is off and blades are not moving. Avoid contact with blades.
Wear gloves to protect hands.
Blade use demands specific brushcutter configuration. Operation
without specified shield, barrier bar or U-handle, and harness can
result in serious personal injury. Follow installation instructions.
24
DPAS-2100
99922238047
© 12/2022 ECHO Incorporated