Lawn mowing tips
1. Hold the lawn mower/trimmer in suspension
with one hand and with the other press the
trigger. For better performance, whenever
possible, move the lawn mower/trimmer from
right to left.
2. Keep an adequate height in relation to the
ground.
3. If the grass is very high, cut it in turns to avoid
overloading the equipment.
Trigger
Before beginning to cut the grass, set the
adjustable support (figure below) according
to the grass length.
42
Finishing and edging
Cuts in alignment are used to trim the grass
that grows over sidewalks and driveways. Tilt
the lawn mower/trimmer and cut above the
paved area.
The support may be removed when necessary
as shown below:
ATTENTION!
Use
!
TRAPP ORIGINAL
PARTS.
TRAPP does not undertake
responsibility for eventual
damages caused to the
equipment, neither for
accidents that may occur
due to the use of non-
original parts.
www.trapp.com.br