TRAPP Master 500L Manual De Instrucciones página 41

www.trapp.com.br
Advance and automatic cutting of the
nylon line
1. With the equipment running:
Slightly press the spool (1) against the ground.
 
The nylon line will automatically be released.
The cutting blade fixed to the protection
device will limit the amount of wire released.
Press the spool against the ground as many
 
times as necessary.
In order not to damage the equipment or the
 
protection device, only press the central part
of the spool against the ground.
2. You may want to carry out this operation manually:
Unplug the equipment.
 
Press the central part of the spool (1) with one
 
hand and with the other pull the nylon line (2)
in the necessary length.
2
2
Fixing the extension cord to the
equipment
To use this system, do as shown in the next figure:
Put the extension cord in hole (1).
 
Pass the cord over the lock (2).
 
Connect the equipment plug to the extension
 
cord (3).
1
1
Before lawn mowing
Carefully check the area where the equipment
 
will be used.
Remove all stones, pieces of wood, wires,
 
bones, glass and other weird objects that
may cause an accident during the use of the
equipment.
For your safety, wear goggles, adequate
1
 
clothing and shoes.
1
1
3
2
41