Spengler AUTOTENSIO SPG340 Manual página 65

Table 3
Guidance and declaration of manufacturer-electromagnetic immunity
The device is intended for use in the electromagnetic environment specified
below. The customer or the user of the device should assure that it is used in such
an environment.
IMMUNI- IEC 60601
TY test test level
RF par 3V for 0.15-
conduc- 80MHz; 6V
tion CEI in ISM and
61000- amateur
4-6 radio bands
between0.15-
80MHz
Radiated 385 MHz, 27
RF IEC V/m
61000- 450 MHz, 28
4-3 V/m
710 MHz,745
MHZ,780 MHz
9V/m
810 MHz,870
MHZ,930 MHz
28V/m
1720 MHz,1845
MHZ,1970 MHz
28V/m
2450 MHz, 28 V
(m)
5240 MHz,
5500 MHZ,
5785 MHz
9 V/m
Compliance Electromagnetic environment -
level guidance
3V for 0.15- Portable and mobile RF communica-
tions equipment should be used no
80MHz; 6V
closer to any part of the device, inclu-
in ISM and
ding cables, than the recommended
amateur
separation distance calculated from the
radio bands
equation applicable to the frequency of
between0.15-
the transmitter.
80MHz
Recommended seperation distance
385 MHz, 27
V/m
450 MHz, 28
V/m
where P is the maximum output power
710 MHz,745
rating of the transmitter in watts (W)
MHZ,780 MHz
according to the transm- itter manu-
9V/m
facturer and d is the recommended
810 MHz,870
separation distance in metres (m).
MHZ,930 MHz
Field strengths from fixed RF transmit-
28V/m
ters, as determined by an zelectroma-
1720 MHz,1845
gnetic site survey, a should be less than
MHZ,1970 MHz
the compliance level in each frequency
28V/m range.
Interference may occur in the vicinity of
2450 MHz, 28 V
equipment marked with the following
(m)
symbol:
5240 MHz,
5500 MHZ,
5785 MHz
9V/m
65
80 MHz to 800 MHz
800 MHz to 2,7 Ghz
EN