Control Panel; A) Main Power Switch; B) Application Selector; C) Power Selector - Walter Surface Technologies SURFOX 205 Manual De Usario

Control panel

A) Main power switch

Turns the main power to the unit ON and OFF.
.

B) Application Selector

INOX / STAINLESS
First Select the Material
Aluminum, Stainless or Titanium
Marking and etching wand selector.
Select this icon when using a marking/etching
wand which has been plugged into the
accessory outlet.
Mini wand. Select this icon when working
with the mini-wand plugged into the
accessory outlet.
Large wand selector. Select this icon when
using the hand wand attached to the
SURFOX unit.

D) Electrolyte Flow

Manual
pumping mode

C) Power selector

On Stainless Steel, Select AC for Cleaning and DC for
Polishing. Level 1 has the lowest amperage setting. Level 3
has the highest amperage setting. For marking or etching,
select AC for marking and DC for etching. Level 1 has the
lowest amperage setting. Level 3 has the highest amperage
setting.
On Aluminum, select AC for cleaning. DC mode will not
polish aluminum. For black marking, select DC. Level 1 has
the lowest amperage setting. Level 3 has the highest
amperage setting
On Titanium for marking, select AC for blue marking.Level
1 has the lowest amperage setting. Level 3 has the highest
amperage setting.
Automatic
pumping mode
AC DC
Cleaning Polishing
Marking Etching
4
Control panel
7
SURFOX 205 User's Guide