Brandson Equipment 306618 Manual Del Usuario página 15

AVERAGE MODE (average display) - Displays the daily average water consumption for the last
7 days. Press the "multifunction button" and the average water consumption of the last 7 days
is displayed. Press and hold the "multi-function button" for 3 seconds to reset the average.
TOTAL MODE (total display) - The total amount of water is measured until the next reset. Press
the multifunction button to display the total water consumption, maximum 99999 L / 99999
GAL. Press and hold the button for 3 seconds to reset the total quantity.
Switching the L & GAL unit - In AUTO MODE, press and hold the multifunction button for 3
seconds to switch between L/Min and GAL/Min.
Sleep mode - If no water flows for longer than 1 minute in any mode or no water flows for
longer than 1 minute, the display goes into standby mode.
If the multifunction button is pressed or water is flowing, the appliance switches on automat-
ically.
Low battery indicator - If the battery voltage is below 2.4 V, the low battery symbol flashes
brightly and darkly on the screen at 0.5 second intervals. Please change the battery when the
symbol appears. When changing the battery, always ensure that the polarity of the contacts is
correct.
6. Safety instructions and disclaimer
At temperatures below freezing, the water flow meter should be removed from the tap and
stored indoors to prevent possible freezing damage.
Never attempt to open the appliance to carry out repairs or modifications. Avoid contact with
the mains voltage. Do not short-circuit the product. The appliance is not frost-proof. Always
store the appliance away from water and frost in winter. Keep the appliance away from high
temperatures.
15
English