Idiomas disponibles
Idiomas disponibles
Frigo DC VAK
4
Intended use
For the installation of the DC unit, the specific Frigo DC VAK holder was
designed, which is installed under the vehicle on the frame rails of a chassis.
Any use other than or beyond that purpose constitutes use other than intended.
5
Scope of delivery
The Frigo DC VAK for the Frigo DC transport refrigeration system consists of the
following components:
• 4 x holders (fig. 1 1)
• 1 x base frame (fig. 1 2)
• Fastening material (fig. 1 3):
– 4 x M8 x 25 bolts
– 8 x M8 Ø24 washers
– 4 x M8 stop nuts
6
Installation
6.1
Installation instructions
!
WARNING! Danger of injury due to live electrical components!
• When connecting the electrical components, there is a risk of electric
shock. Before starting any installation work, disconnect the battery and
make sure that no voltage can be transferred to the electrical components.
• Improper interventions, such as the use of branch connectors in the vehi-
cle's electrical system and electronics system, can lead to impairment of the
functions. This can lead to the failure of vehicle-mounted components or
vehicle safety equipment and as a result to accidents involving personal
injury or damage to the vehicle.
!
CAUTION!
The transport refrigeration system may only be installed by qualified personnel
from a specialist company. The following information is intended for techni-
cians who are familiar with the guidelines and safety precautions to be applied.
6.1.1
Information before installation
• Before installation, check whether any vehicle components could be dam-
aged or have their function impaired as a result of the installation.
• Check the completeness of the Frigo DC VAK according to the scope of
delivery.
EN
Intended use
5
